Flight Recorder Panel

 Strategies
Kit Bashing
All plates need to be trimmed a little to allow easier fitting.

Backplate
Width5.75" (approx 146.05 mm)
Height6 DZUS units (6 x 0.375")
2.25" (approx 57.15 mm)
Backplate Thickness1/16"
Light Plate Thickness1/4" (0.25")
Module Depth6" (estimated) + connector


Simulator Supplier Parts
Hispa Panels145 x 60 mm
Sismo SolucionesDimensions not listed
CockpitSimPartsDimensions not found


December 2016 prices
Supplierpanelannunpartstotalnotes
Hispa Panels 32incl739 €
Sismo Soluciones-Module 36inclincl36 €Assembled (no backlighting)
Sismo Soluciones-PanelPanel not found
Open Cockpits219incl????? €Entire Aft Panel only
CockpitSimParts20incl~9£ 29 (for both panels)with Flight Recorder panel
PC FlightsPanel not found
STRATEGIES
The Problem :
This panel is too high and the mounting hole spacing is just wrong.

The challenge is to make a unit of the correct size that fits between the rails.
The photos below show the panel build as supplied by Hispa Panels.

Post Script files for the circuit board

Circuit Board
Circuit Board Mirrored

  • No obvious solution yet.
    KIT BASHING