Bandwidth : DC to 290 MHz (3.5 ft & 6 ft cables)
Attenuation : 10X ±3%
Input Resistance : 10 MΩ within ±2%
| Input Capacitance : | 10.3 pF (3.5 ft cable)
12 pF (6 ft cable) |
Scope Input Resis : 1 MΩ
Compensation Range : 15pF to 24pF
Readout Pin : Yes
Ground Ref : No
ID Button : Yes
Max Rated Voltage : 500 V (DC + Peak AC)
|
|
The P6053B probe is designed primarily for use with Textronix 7A-series 1 MΩ vertical amplifier plug-in units.
The P6053B is a miniature, passive, fast-rise 10X attenuation probe designed for use with Tektronix
7A-series vertical amplifier plug-in units. The probe can be compensated for use with other oscilloscopes
or plug-in units having an input capacitance of 15 to 24 pF (paralleled by 1 MΩ).
A trace identification pushbutton on the body of the probe permits the user to determine which trace of a multi-trace display includes the signal from the P6053B Probe. A coding ring on the BNC output connector actuates the Volts/Div readout of the oscilloscope mainframe to include the 10X attenuation of the probe. The connector is compatible with all BNC input connectors.
The probe consists of a small-diameter probe body assembly, 1 3.5-foot, or 6-foot cable, and a compensation box with a BNC connector.
(excerpt from the 1969 Tektronix Catalog)
Electrical
| Attenuation : | 10X ±3% . |
| Input Resistance : | 10 MΩ within 2% . |
| Input Capacitance : | 10.3 pF within 0.5 pF (3.5 ft cable)
12 pF within 0.5 pF (6 ft cable) |
|
| Compensation Range : | 15 pF or less to at least 24 pF. |
| Bandwidth (-3 dB) : | DC to 290 MHz (3.5 ft & 6 ft cables) |
| Maximum Input Voltage : | 500 VDC (DC + Peak AC) |
|
(excerpt from Tektronix P6053B Probe Instruction Manual 010-6053-11)
| Tektronix Catalog Cost | Low Bid | High Bid | average |
|---|
| $50 (1969) |
. | . | . |
|
$33.10 (2-probes) (+$3 ship) 6/2/09 #270397731415 john_fender (7 bids $9.95 start) (guaranteed-w/grabber,gnd clip)
|
|