Bandwidth : DC to 35 MHz
Attenuation : 10X
Input Resistance : 10 MΩ
Input Capacitance : approx. 6.0pF (3.5 ft. cable)
Scope Input Resis : 1 MΩ
Compensation Range : 15pF to 55pF
Readout Pin : Yes (5000 series only)
Ground Ref : No
ID Button : No
Max Rated Voltage : 1.5 KV RMS
|
 |
Catalogs reference the 5000 series modules, especially in reference to the special grounding clip
P6060 readout is NOT compatible with CRT readout.
The 1989 Tektronix catalog also recommends this probe for use with the 2300 series.
The 1982 Catalog associated th3 P6060 with the AM502, SC501, SC502 and SC503.
The P6060 is a precision passive probe with 10X attenuation, for use with TEKTRONIX low and mid-frequency
oscilloscopes used in differential applications. The precise attenuation also provides greater accuracy for
single-ended input applications, such as amplitude measurements with a differential comparator. The probe can
be compensated for use with any amplifier input having a nominal input capacitance of 15 to 55 pF and input
resistance of 1 MΩ.
The BNC-type connector utilizes a special grounding clip to shift the deflection factor indicator
to 10X normal reading in 5000-Series oscilloscopes.
(excerpts from Tektronix 1973, 1977, and 1982 Catalogs)
| Attenuation : | 10X - Accuracy when used with a 1 MΩ ± 0.15% instrument
input will be within ± 0.4%
When used with a 1 MΩ ± 2% instrument input the accuracy will
be within ± 2% |
| Input Resistance : | 10 MΩ within ±0.25% with a 1 MΩ ± 0.15%
instrument input;
10 MΩ within ± 0.4% when used with a 1 MΩ ± 2% instrument input. |
| Input Capacitance : | for 15 pF instruments is @6.0 pF
with 3.5 ft. probe and @ 7.7 pF with 6 ft;
with 55 pF instruments it
is @9.5 pF with the 3.5 ft, @11.5 pF for the 6 ft. |
|
| Cmrr (Probe Pair) : | At least 400:1 (with 5A20N or 5A21N) dc to 30 kHz |
| Bandwidth : | 3.5 ft probe at least 40 MHz (with scope bandwidth of at least 60 MHz);
6 ft probe at least 30 MHz (with scope bandwidth of at least 60 MHz) |
| Max Input Voltage : | 600 V (dc + peak ac) |
|
(excerpts from Tektronix 1973, 1977, and 1982 Catalogs)
| Tektronix Catalog Cost | Low Bid | High Bid | average |
|---|
$35 (1973)
$49 (1977)
$78 (1982)
|
. | . | . |
|
$
|
|