Bandwidth : DC to 100 MHz
Attenuation : 1X / 10X Switchable
Input Resistance : 1 MΩ / 10 MΩ
Input Capacitance : 100 pf / 13.5 pf
Scope Input Resis : 1 MΩ
Compensation Range : 15pF to 47pF
Readout Pin : Yes
Ground Ref : Yes
ID Button : No
Max Rated Voltage : 500 V (dc + peak ac)
|
 |
Tektronix catalogs list the following compatibilities:
7A13, 7A15A, 7A18, 7A22
5A14N, 5A15N, 5A18N, 5A38, 5A45, 5A48, 5D10
455, 464, 465, 466, 468, SC501, SC502, SC503, SC504
The P6062B is a passive dual attenuation probe designed for oscilloscopes with bandwidths to 100 MHz.
A sliding switch on the probe body selects 1X or 10X attenuation. This 1X-10X switch allows the user to switch
in and out a decade of sensitivity without returning to the test instrument. Attenuation may be arbitrarily
switched from 1X to 10X to evaluate the effects of loading of the oscilloscope on the circuit under test.
The probe provides readout coding for oscilloscopes which have readout capability. The readout changes with
the probe attenuation switch so the correct attenuation setting is always displayed on the oscilloscope.
A pushbutton is provided for actuating a ground reference. The ground reference can be used as a means of
trace identification for a multitrace display.
The P6062B can be compensated with instruments having a nominal input capacitance of 15 to 47 pF.
(Excerpts from 1977 and 1989 Tektronix Catalogs)
| Attenuation : | 1X or 10X switchable |
| Accuracy : | 1X - same as Scope
10X - 3% |
| Bandwidth (1X) : | 8 MHz (3.5 ft cable)
6.7 MHz (6 ft cable)
4.5 MHz (9 ft cable) |
| Bandwidth (10X) : | 100 MHz (3.5 ft and 6 ft cables)
95 MHz (9 ft cable) |
| Probe Input Resistance : | 1X - same as scope
10X - 10 MΩ |
|
| Probe Input Capacitance (1X) : | 100 pF (3.5 ft cable)
105 pF (6 ft cable)
135 pF (9 ft cable) |
| Probe Input Capacitance (10X) : | 13.5 pF (3.5 ft cable)
14 pF (6 ft cable)
17 pF (9 ft cable) |
| Maximum DC Voltage : | 1X - 100 V derated above 450 kHz
10X - 500 V derated above 3.5 MHz |
| Compensation Range : | 15 to 47 pF |
|
(Excerpts from 1977 and 1989 Tektronix Catalogs)
| Tektronix Catalog Cost | Low Bid | High Bid | average |
|---|
$95 (1977)
$150 (1982) | |
$175 (1985)
$175 (1989) |
|
. | . | . |
$26.55 8/2/01 #1619923118 booksabill
$35.00 1/5/03 #3103859268 jloy37917 (5 bids)
$49.00 (+~$21 ship) 1/18/08 #330204052434 masssurplus24 (1 bid) (new in bag)
$14.60 (+~$14 ship) 1/29/08 #130192431239 techreccenter (? bids $9.99 start-multiple units) (tested-w/grabber, gnd clip)
|
|