|
Bandwidth : |
DC to 34 MHz (1 meter blue cable)
DC to 15.5 MHz (2 meter yellow cable)
DC to 8 MHz (3 meter red cable)
|
Attenuation : 1X ±1.5% at DC
Input Resistance : 1 MΩ ±1.0%
|
Input Capacitance : |
32 pF (1 meter blue cable)
54 pF (2 meter yellow cable)
78 pF (3 meter red cable)
|
Scope Input Resis : 1 MΩ
Compensation Range : N/A
Readout Pin : No
Ground Ref : No
ID Button : No
Max Rated Voltage : 500 V DC + peak AC
| 
|
The P6101 probe is compatible with most general purpose oscilloscopes that have a 1 MΩ input impedance.
The P6101 is one of a new series of modular probes. The probe divides into three modules (probe head, cable, and connector/compensation box).
The modules snap together making maintenance and repair less expensive, faster, and much easier.
(The P6101, since it is a 1X probe, does not have the compensation box).
The P6101 is available in three color-coded lengths - blue for one meter, yellow for two meters, and red for three meters.
(Above excerpt from Tektronix catalogs dated 1977 and 1982)
Electrical
| Attenuation: | 1X |
| Input Resistance: | 1 MΩ |
| Input Capacitance: | 32 pF (1 meter blue cable)
54 pF (2 meter yellow cable)
78 pF (3 meter red cable) |
| Bandwidth : | 34 MHz (1 meter cable)
15.5 MHz (2 meter cable)
8 MHz (3 meter cable) |
| Maximum Input Voltage: | 500 V DC + peak AC |
|
Environmental
Probe will operate within specifications over the following ranges:
Temperature: -15° to +65°C.
|
(Above excerpt from Tektronix catalogs dated 1977 and 1982)
| Tektronix Catalog Cost | Low Bid | High Bid | average |
|---|
$34 (1977)
$60 (1982)
|
. | . | . |
$22.52 8/5/01 #1622715652 seaweed!
no bid (asked $30) 8/7/01 #1622652301 outback6
no bids (asked $49.99)8/12/01 #1624391025 hi-tekjoe
$19.28 8/15/01 #1625264386 outback6
|
|