|
Bandwidth : |
DC to 34 MHz (1 meter blue cable)
DC to 15 MHz (2 meter yellow cable)
DC to 8 MHz (3 meter red cable)
|
Attenuation : 1X ±1.5% at DC
Input Resistance : 1 MΩ ±1.0%
|
Input Capacitance : |
32 pF (1 meter blue cable)
54 pF (2 meter yellow cable)
78 pF (3 meter red cable)
|
Scope Input Resis : 1 MΩ
Compensation Range : N/A
Readout Pin : No
Ground Ref : No
ID Button : No
Max Rated Voltage : 500 V DC + peak AC
| 
|
The P6101 probe is compatible with most general purpose oscilloscopes that have a 1 MΩ input impedance.
The 1985 catalog lists the 5000 Series, 7A13, 7A15A, 7A16A, 7A18A, 7A22,
2300 Series, 2200 Series, 400 Series, T900 Series
AM 502, DC 509, PG 501, PG 502, PG 506, PG 507,
SC501, SC 502, SC 503, SC 504
as compatible with the P6101A
The P6101A is one of a new series of modular probes. The probe divides into three modules (probe head, cable, and connector/compensation box).
The modules snap together making maintenance and repair less expensive, faster, and much easier.
(The P6101A, since it is a 1X probe, does not have the compensation box).
The P6101A is available in three color-coded lengths - blue for one meter, yellow for two meters, and red for three meters.
(Above excerpt from Tektronix catalogs dated 1985 and 1989)
Electrical
| Attenuation: | 1X |
| Input Resistance: | 1 MΩ |
| Input Capacitance: | 32 pF (1 meter blue cable)
54 pF (2 meter yellow cable)
78 pF (3 meter red cable) |
| Bandwidth : | 34 MHz (1 meter cable)
15 MHz (2 meter cable)
8 MHz (3 meter cable) |
| Maximum Input Voltage: | 500 V DC + peak AC |
|
Environmental
Probe will operate within specifications over the following ranges:
Temperature: -15° to +65°C.
|
(Above excerpt from Tektronix catalogs dated 1985 and 1989)
| Tektronix Catalog Cost | Low Bid | High Bid | average |
|---|
$67 (1985)
$53 (1989)
|
. | . | . |
$21.00 1/19/03 #3107419101 ohwags (grabber,ground) (14 bids $1.25 start)
$6.00 (+$5 ship) 7/5/07 #190128550853 gomobius (2 probes-4 bids) (working-w/ grabber,gnd clip)
|
|