Tektronix S-53 Trigger Recognizer Head

Back to Tek 7000 Series Summary Page
Quick Specifications / Photos
List of Options
Detailed Specifications

Samples of e-Bay Prices
Tektronix Catalog CostLow BidHigh Bidaverage
$425 (1973)
$600 (1977)
$1120 (1982)
$1315 (1985)
$1530 (1989)
...
$48.80 8/11/01 #1623846042 30for30s
no buy ($54.78 < reserve) 10/27/01 #1653854479 televisionary
no buy ($37.01 < reserve) 11/3/01 #1656732489 televisionary
$32.58 4/3/03 #2519274764 bwillcox (untested) (12 bids $5 start)
$24.39 (+$8 ship) 5/3/06 #7614038906 nouturnhere (3 bids $5 start) (untested)

QUICK SPECS / PHOTOS
  • DC to 1 GHz Operation
  • 10 mV Sensitivity
  • .
  • .




    LIST OF OPTIONS
    (No Options)

    SPECIFICATIONS
    The S-53 Trigger Recognizer Head is intended for use with the 7S12 to permit operation as a general-purpose sampling system. The S-53 supplies triggering for the 7S12 or for other applications. The S-53 can also be powered from the 7S11, 3S2, 3S5, 3S6, 285 or 286.

    INPUT CHARACTERISTICS Frequency range is DC to 1 GHz. Sensitivity range is 10 mV to 2 V P-P into 50Ω, Kickout at input, ±5 mV or less.
    OUTPUT CHARACTERISTICSRisetime is 1 ns or less. Amplitude is at least 1.5 V positive-going into 50Ω. Pulse duration is 3 ns within 2 ns at the 50% amplitude level. Trigger-to-signal delay is 15 ns or less; jitter is 15 ps or less.
    POWER REQUIREMENTSPower is provided from the 7S11, 7S12, 3S2, 3S5, 3S6, 285 or 286.
    CONNECTORSTrigger input connector is BNC type. Front-panel, trigger output connector is BSM type. Trigger output is also available at rear connector for internal triggering.

    (Above taken from 1973 Tektronix Products catalog)