|Orig Cost||Low Bid||High Bid||average|
|$9.99 3/25/03 #2517564638 wtsps (untested-no modules) (1 bid)|
The MX5010 is only needed if you wish to extend the MI5010 control to six function cards at one GPIB address.
The MX5010 plugs into the side of the MI5010 with flex cable as shown above. Both units then plug into the TM5000 series mainframes.
Total space used in the mainframe will be 4 positions.
Cards rapidly slide in and out of the MI5010 and MX5010 system for a fast flexible approach to test.
Alternatively, for dedicated applications, card configuration can be secured in the MI5010 and MX5010 with rear locking screws.
Cards are programmable by GPIB or front panel connector.
Example of complete system mounted in TM5006 Mainframe with a programmable digital voltmeter