Tektronix 1L5 Spectrum Analyzer Plug-In Unit

Tektronix 1L5 Spectrum Analyzer Plug-In Unit (1969)

Tek Catalog Cost	Low Bid	High Bid	average
$1025 (1969) $1300 (1973) $1700 (1974)	.	.	.
$74.55 1/13/03 #3105591724 recycledgoodies (6 bids $50 start) $68.00 1/24/03 #3108704015 rocker-boy (untested) (5 bids $10 start) $53.00 3/12/06 #7596115094 mvannelli (9 bids $0.99 start) (untested - some damage to knobs) $122.50 4/11/06 #7607710558 o3enterprises (13 bids $9.99 start) (untested - nice cosmetically) $120.07 (+$10 ship) 6/14/09 #160341488469 richardnelsonauctions (4 bids $49.99 start) (no testing ?-refund if DOA)

	.
	.
	.
	.

The Center Frequency Range is 50Hz-990kHz, making it useful for most kinds of audio measurements. The Dispersion (Hz/cm) can be set in steps from 10Hz to 100kHz. The input attenuator can be set in 22 steps from 100V/cm down to 1mV/cm. The vertical display can be set for linear or logarithmic, and the unit has ">60dB" dynamic range (noise level =<5 microvolts). The useful sweep rates are low (20ms recommended) and the sweep output of the scope is applied to the sweep input terminal of the 1L5.
====================================
Tektronix 1L5 Spectrum Analyzer plug-in. The 1L5 has a rated bandwidth of 50Hz to 1MHz so it is ideal for audio and low frequency RF applications. This plug-in is designed to work with the early Tektronix 530, 540, and 550 series of oscilloscopes. It will work with some other series with the proper adapters.